Polaris Ranger XP HD Crew Diesel 6x6 EV 400 500 700 800 RZR RZRS RZR4 RZR 900 XP, Yamaha Rhino
Can-Am Commander, Honda Big Red MUV, Kawasaki Mule Teryx, Arctic Cat Prowler, Golf Cart
|
|
|
|
|
|
|
|
|
|
|
Sorry, out of stock, we are developing a NEW Kit!
|
|
Are you tired of running down the battery because your off road lights are drawing 2 or 3 times what your charging system is putting back into the battery? LED Off-Road Lights only draw about 1/4th the power most other off road lights do; they will save your battery and the abuse on your charging system.
We give you two (2) LED off road lights with our kit, so you can adjust the lights to fit your lighting needs. This design offers great style, performance and fitment to virtually any off road vehicle. These LED off road lights will brighten up any trail to help you with your nighttime driving. If you want to make driving at night safer and more enjoyable then this LED Off-Road Light kit is for you.
|
|
|
The LED Off-Road Lights are 5.9 x 3.6 x 1.6 rectangular with 6 High Output Bright LEDs each. They have a Flood Beam Pattern with a Dual Auto Select (12/24 volt DC) input voltage. They put out 600 Lumens each for a total of 1200 Lumens and only draw 2.6 amps total with both lights on. They come with a Stainless Steel 5/16 x 7/8 inch bolt and Mounting Bracket. They have a black aluminum housing, clear polycarbonate lens and are rated for 100,000 hours.
|
|
|
|
|
LED Off-Road Light Kit with 2 LED lights
|
|
|
|
|
|
|
Sorry, out of stock, we are developing a NEW Kit!
|
|
|
|
LED Off-Road Lights:
- 6 Bright LED's each
- Flood Beam Pattern
- Polycarbonate Lens
- Auto Select 12/24 VDC
- 100,000 Hour Rated LED Life
- Powder Coated Aluminum Housing
- Stainless Steel bolt & Mounting Bracket
|
|
|
|
|
|
|
Mounting the LED off road lights: The LED lights mount in a 3/8" inch hole. Most of the newer UTVs come with mounting tabs or locations for mounting AUX lights. Light bars work great and can give you more room, for more lights. You can drill a 3/8" inch hole in some cases where you want to mount the lights. You can use a vinyl/rubber coated, plastic, aluminum billet or steel clamp that will allow you to mount the lights to the roll cage or bumper (not included).
|
|
|
|
|
|
|
|
|
|
|
2 LED Off-Road Lights
1 LED Rocker Switch
1 ATC Fuse Holder
1 ATC 5 Amp Fuse
|
|
1 7 foot Red Power Wire w/connectors
1 10 foot Black Load Wire w/connector
1 10 & 7 White GND Wires w/connectors
6 Butt Connectors & 10 Black Wire Ties
|
|
Hardware for mounting lights in 3/8" hole
Mounting Installation Instructions
Wiring Instructions & Diagram
Complete support from EZTSK
|
|
|
|
|
|
If you already have Off-Road Lights mounted on your recreational vehicle and want to change them to LED, you can purchase the LED Off-Road Lights separately. You can remove your existing lights and use the existing wiring to operate these LED off road lights. These LED off road lights only draw 1.3 amps each that will save your battery and the abuse on your charging system.
|
|
Maybe you want to have 3 or 4 LED Off-Road Lights? You can purchase extra lights and add them into the circuit. We recommend that you increase the fuse to a 7.5 amp with 3 lights total or a 10 amp fuse with 4 lights total.
Note: DO NOT exceed more than 4 LED Off-Road Lights on one circuit.
|
|
|
|
LED Off-Road Light Sold Separately
|
|
|
|
|
|
|
Sorry, out of stock, we are developing a NEW Kit!
|
|
|
|
|
|
 
|
|
|
|
Not what your looking for, checkout these kits:
|
|
|
|
|
For more information:
EZ Turn Signal Kits
P. O. Box 1818
Glendale, AZ 85311-1818 US
E-mail: Cisco@LEDTSK.com
Glendale Office #1: (623) 435-1337
Glendale Office #2: (623) 939-0834
|
|
|
|
|
