Polaris Ranger XP HD Crew Diesel 6x6 EV 400 500 700 800 RZR RZRS RZR4 RZR 900 XP, Yamaha Rhino
Can-Am Commander, Honda Big Red MUV, Kawasaki Mule Teryx, Arctic Cat Prowler, Golf Cart
|
|
|
|
|
|
|
|
The Benz Silent Rider Exhaust Silencer
|
|
|
|
|
Arctic Cat Prowler Exhaust Silencer
Honda Big Red MUV Exhaust Silencer
Kawasaki Mule Exhaust Silencer
|
|
Polaris Ranger Exhaust Silencer
Polaris RZR Exhaust Silencer
Polaris RZR-4 Exhaust Silencer
|
|
Yamaha Rhino Exhaust Silencer
Yamaha Grizzly Exhaust Silencer
|
|
|
The Benz Silent Rider UTV/ATV exhaust silencer fits most any UTV/ATV with a four stroke gas engine, to quiet the stock exhaust noise from 30% to 60%, without sacrificing any engine loss of power or performance. The UTV/ATV exhaust silencer is made of 14-gauge aluminized steel that helps prevent corrosion and is easy to install. These UTV/ATV exhaust silencers come with a U.S. Forestry approved spark arrestor that helps provide you with a safer ride. The Benz Silent Rider comes with sound deadening mufflers that reduce exhaust noise by up to 60%. You can turn that sharp pop to a smooth purr with the Benz Silent Rider UTV/ATV exhaust silencer.
The Benz Silent Rider UTV/ATV exhaust silencer is ideal for hunters, street travel, trail riders, dune riders, the military, law enforcement, etc.
The models below marked with a (*) will use the adapter provided in the kit at no extra charge. These adapters will require welding to the factory muffler. This will create an attachment point for the UTV/ATV exhaust silencer to pressure fit on and off. Only the adapter is permanent, the Benz Silent Rider is not a permanent device, you can choose to leave it on or take it off by 2 bolt hangers.
Some models do not need an adapter, being the factory muffler has enough flange to attach to. The models listed below have an optional bolt on adapter that will use the same bolt pattern, so no new holes will be needed.
All of the UTV/ATV exhaust silencers are custom designed to fit the individual unit, with heat shield & turndown pipe. They mount very sturdy without any rattling or loose components.
|
|
|
|
NOTE: There are a few models of the Benz Silent Rider that could perform better at higher elevations, if vented. If you are planing to use the Benz Silent Rider at elevations above 6,000 feet, you may want us to vent it for you, NO CHARGE! Let us know if you have one of these models listed below and want us to vent it for you by using the drop down titled Used at elevations:
|
|
Kawasaki Mule 610 (05-12) *BT-610
Kawasaki Mule 2500/3000/3010 (00-08) BT-44
Kawasaki Mule 4010 (09-12) BT-44
|
|
Polaris Ranger 4 wheels (01-04) *BT-46
Polaris Ranger 6 wheels (02-12) *BT-47
|
|
|
|
|
|
|
|
|
|
|
Silencers will ship from the NC or PA factory
UPS Ground within 3 to 5 business days.
|
|
|
|
|
|
Arctic Cat Prowler 550 - (09-11) - *BT-42 - weld on adapter included
Arctic Cat Prowler 650 - (06-07) - *BT-43 - weld on adapter included
Arctic Cat Prowler 650 - (08-09) - *BT-42 - weld on adapter included
Arctic Cat Prowler 700 - (08-11) - *BT-42 - weld on adapter included
Arctic Cat Prowler 700 HDX with center exhaust - Doesn't properly mount on UTV - not supporting
Can-Am Commander 800 / 1000 - No room to mount on UTV - not supporting
Honda Big Red MUV - (09-11) - BT-39A - bolt on adapter only included (+$42)
Kawasaki Mule 610 - (05-12) - *BT-610 – weld on adapter included
Kawasaki Mule 610XC - Doesn't properly mount on UTV - not supporting
Kawasaki Mule 2500/3000/3010 - (00-08) - BT-44 – no adapter needed
Kawasaki Mule 4010 - (09-12) - BT-44 – no adapter needed
Kawasaki Teryx - Developed a silencer, didn't make much difference - not supporting
Polaris Ranger 4 wheels - (01-04) - *BT-46 - weld on adapter included
Polaris Ranger 4 wheels - (05-12) - *BT-45 - weld on adapter included
(XP, HD, Crew) (400, 500, 700, 800) models
Silencer does not work with diesel models
Polaris Ranger 6 wheels - (02-12) - *BT-47 - weld on adapter included
|
|
Polaris RZR (OLD Pre-runner Bumper - bumper has cross bar below exhaust) - (08) - BT-50 – no adapter needed (+$20)
Polaris RZR (NEW Pre-runner Bumper - bumper has shield below exhaust) - (08) - no room to mount silencer - not supporting
Polaris RZR (OLD Deluxe Brush Guard Bumper - bumper has no cross bar or shield below exhaust) - (08) - BT-51 – no adapter needed (+$20)
Polaris RZR (NEW Deluxe Brush Guard Bumper- bumper has shield below exhaust) - (08) - no room to mount silencer - not supporting
Polaris RZR (No Bumper) - (08) - BT-55 – no adapter needed (+$20)
|
|
|
|
|
|
|
|
Polaris RZR (OLD Pre-runner Bumper - bumper has cross bar below exhaust) - (09-12) - BT-54 – no adapter needed (+$20)
Polaris RZR-4 (OLD Pre-runner Bumper - bumper has cross bar below exhaust) - (10-12) - BT-54 – no adapter needed (+$20)
Polaris RZR (NEW Pre-runner Bumper - bumper has shield below exhaust) - (09-12) - BT-56 – no adapter needed (+$20)
Polaris RZR-4 (NEW Pre-runner Bumper - bumper has shield below exhaust) - (10-12) - BT-56 – no adapter needed (+$20)
Polaris RZR (OLD Deluxe Brush Guard Bumper - bumper has no cross bar or shield below exhaust) - (09-12) - BT-52 – no adapter needed (+$20)
Polaris RZR-4 (OLD Deluxe Brush Guard Bumper - bumper has no cross bar or shield below exhaust) - (10-12) - BT-52 – no adapter needed (+$20)
Polaris RZR (NEW Deluxe Brush Guard Bumper - bumper has shield below exhaust) - (09-12) - BT-52 – no adapter needed (+$20)
Polaris RZR-4 (NEW Deluxe Brush Guard Bumper - bumper has shield below exhaust) - (10-12) - BT-52 – no adapter needed (+$20)
Polaris RZR (No Bumper) - (09-12) - BT-53 – no adapter needed (+$20)
Polaris RZR-4 (No Bumper) - (10-12) - BT-53 – no adapter needed (+$20)
Polaris RZR-S (2009-12) - Roll bar extends down in back, no room to mount silencer - not supporting
Polaris RZR 900 XP (2011-12) - not supporting at this time
|
|
Yamaha Rhino 450 - (06-09) - *BT-5 - weld on adapter included
Yamaha Rhino 450 - (06-09) - BT-5A - bolt on adapter included (+$22)
Yamaha Rhino 660 - (04-07) - *BT-5 – weld on adapter included
|
|
Yamaha Rhino 660 - (04-07) - BT-5A - bolt on adapter included (+$22)
Yamaha Rhino 700 - (08-12) - BT-1A - bolt on adapter only included (+$22)
|
|
|
|
Yamaha Grizzly 450 - (07-12) - BT-32A - bolt on adapter only included (+$22)
Yamaha Grizzly 550 - (09-12) - BT-33A - bolt on adapter only included (+$22)
Yamaha Grizzly 660 - (02-08) - BT-32A - bolt on adapter only included (+$22)
Yamaha Grizzly 700 - (07-12) - BT-33A - bolt on adapter only included (+$22)
|
|
|
|
|
|
|
|
|
|
|
INSTALLATION OF THE BENZ SILENT RIDER UTV EXHAUST SILENCER
|
|
|
Never is the Benz Silent Rider UTV/ATV exhaust silencer a permanent mount. Only the adapter that requires welding is permanent. Adapters are used for an attachment point. All UTV/ATV exhaust silencers will pressure/friction fit onto the stock muffler flange or the adapter. This unique design does not need clamping, making it a very easy installation and removable if needed. All UTV/ATV exhaust silencers are designed with a heat shield, turndown pipe and mounting brackets for a secure mount. There is no assembly necessary!
|
|
NO ADAPTER NEEDED
This means that your UTV has enough tail pipe or flange on the stock muffler for the silencer to get a tight seal without any welding needed. There is support brackets on the silencer that will mount to your back rack bars or frame with clamps provided, which will secure a solid mount.
|
|
WELD-ON ADAPTER
This means that your UTV muffler does not have anything for the silencer to attach to. We have created a small piece of tubing that we recommend wire welding to the end of your stock muffler. Remember only the adapter is permanent, not the silencer. This will create the perfect size tubing for the silencer to pressure fit on to. There is support brackets on the silencer that will mount to your back rack bars or frame with clamps provided, which will secure a solid mount.
OPTIONAL BOLT-ON ADAPTER
This is only available for the Yamaha Rhino 450 and 660. This is an extra charge of $22.
You can choose the “weld on adapter” at no charge, but you do have this option being your stock muffler has 3 existing bolts in the spark arrestor. The bolt on adapter makes it easier to mount because it lines up perfectly with the existing bolt holes. There is no need to drill new or extra holes! Once the adapter is in place, the silencer will pressure fit to it. There is support brackets on the silencer that will mount to your back rack bars or frame with clamps provided, which will secure a solid mount.
|
|
|
|
|
|
|
|
Silencers will ship from the NC or PA factory
UPS Ground within 3 to 5 business days.
|
|
|
|
 
|
|
|
|
Frequently Asked Questions
|
|
How quiet is the Benz Silent Rider?
It quiets most 4-stroke gas engine UTV’s and ATV's up to 60%
Do you lose power or performance?
The exhaust silencer is designed to where it only adds 2% back pressure. We have it as quiet as possible without losing any power. In some cases, it has shown to increase bottom end power.
Will it hurt my engine?
No, the exhaust silencer has been used for over 12 years on ATV’s and UTV’s without any damage to the engine. It is designed only for 4-stoke gas engine ATV’s and UTV’s.
Do I need to weld on my UTV?
On some models, where there is not enough flange or tail pipe to attach to, it will be necessary to wire or mig weld the adapter to the end of the stock muffler. Only the adapter is permanent. The exhaust silencer will pressure fit onto the adapter.
Can I install this myself?
Yes, our exhaust silencer will mount directly to the stock muffler. If your model does not use an adapter, it can be installed in less than 10 minutes. If your model takes the weld-on adapter, or the bolt-on adapter application, it will take a few additional minutes to install. Then it bolts directly to your back rack bars or frame.
I have a bed on my UTV, will it still dump?
Yes, the exhaust silencer will not interfere with the dump bed.
|
|
How is the Benz Silent Rider designed?
The Benz Silent Rider is manufactured here in the United States. It is made of 14 gauge aluminized steel. During production the brackets and heat shield are positioned and welded in place. This makes a more compact looking unit. The Benz Silent Rider is baffled with fiberglass packing, providing the ultimate silencing. If the exhaust silencer uses an adapter, they are each pre-fitted to insure of a tight fit, so no clamping will be necessary at the exhaust. The Benz Silent Rider carries a patent for an Auxiliary Silencer for All Terrain Vehicles.
How long has the Benz Silent Rider been in use?
We have been testing the silencer for over 12 years. We are pleased to say that our silencers are being used by law enforcement, military, hunters, game wardens and many others for over 9 years.
|
|
|
Not what your looking for, checkout these kits:
|
|
|
|
|
For more information:
EZ Turn Signal Kits
P. O. Box 1818
Glendale, AZ 85311-1818 US
E-mail: Cisco@LEDTSK.com
Glendale Office #1: (623) 435-1337
Glendale Office #2: (623) 939-0834
|
|
|
|
|
|
|
|
