Polaris Ranger XP HD Crew Diesel 6x6 EV 400 500 700 800 900 RZR RZRS RZR4 RZR XP RZR XP-4, Yamaha Rhino
Can-Am Commander, Honda Big Red MUV, Kawasaki Mule Teryx, Arctic Cat Prowler, Golf Cart
|
|
|
|
|
|
|
Hello and Welcome to
EZ Turn Signal Kits & Accessories
|
|
|
|
|
|
The turn signal switch used in our aftermarket turn signal kits.
|
|
|
Our Turn Signal Switch is heavy duty, has the right and left turn signals along with a pull out flare tab for the 4-way emergency (hazard warning) flashers and has an indicator (pilot) light showing the turn signal or emergency flashers are activated.
|
|
|
We developed a custom turn signal switch (TSS) mounting strap for the 2009-2010 Polaris Ranger 500, the 2009-2012 Polaris Ranger XP & HD, the 2010-2012 Polaris Ranger 800 Crew & 6x6, and the 2011-2012 Polaris Ranger Diesel models. This professional looking mount will allow full range of motion and clearance for the tilt steering wheel.
|
|
|
We developed a custom turn signal switch (TSS) mounting plate for the 2010-2012 Polaris Ranger EV & 400 and the 2011-2012 Polaris Ranger 500 & 500 Crew models. This professional looking black powder coated plate looks and works great on the mid-size Ranger's.
|
|
|
We developed a custom turn signal switch (TSS) mounting bracket for the 2011-2012 Can-Am Commander. This professional looking black powder coated bracket is very EZ to install and it works great on the Can-Am Commander's.
|
|
|
We developed a custom turn signal switch (TSS) mounting bracket for the 2009-2012 Honda Big Red MUV. This professional looking black powder coated bracket looks and works great on the Honda MUV's.
|
|
|
We have seen several turn signal switches out there that come with a hose clamp, not this company. You will always get good looking and high quality aftermarket turn signal kits from EZ Turn Signal Kits & Accessories!
|
|
Check out our entire stock of aftermarket turn signal kits & accessories and if you have any questions, please contact us, we are here to help you!
|
|
|
|
|
|
|
|
|
|
The SM LED Turn Signal Kit will fit all years for the Polaris RZR, RZRS, RZR4, RZR XP 900, RZR XP-4 900, Ranger XP, HD, Crew, Diesel, 6x6, EV, 400, 500, 700 & 800 models, all years for the Yamaha Rhino 700, 660 & 450 models, all years for the Can-Am Commander 800 & 1000 models, all years for the Honda Big Red MUV, all years for the Kawasaki Teryx & Mule models, and all years for the Arctic Cat Prowler models. (SEE NOTES BELOW) This kit can be easily installed on any Side-by-Side (side x side), Golf Cart, Sand Car, etc.
Note: some like to customize their UTV with Double or Triple lights, order from the drop down box (BELOW) a) Light Options: Double Lights: 4 Amber & 4 Red lights or Triple Lights: 6 Amber & 6 Red lights.
Note: some like amber lights front and rear, order from the drop down box (BELOW) a) Light Options: Amber Kit: All 4 Amber lights or Double Lights All Amber: 8 Amber lights or Triple Lights All Amber: 12 Amber lights.
|
|
Note: All Makes & Models Listed Below will use the Standard Turn Signal Switch (TSS) Mounting Hardware list includes: 1999-2008 Polaris Ranger's all models, 2008-2012 RZR's all models, 2008-2009 Ranger 700 Crew's, 2004-2012 Yamaha Rhino's all models, 2000-2012 Kawasaki Mule's all models, 2008 Kawasaki Teryx, 2005-2007 Arctic Cat Prowler 550 & 650, 2009-2012 Prowler 1000, Golf Cart, Sand Car, Dune Buggy, etc. If you have 3" inches or more of steering column space, the standard turn signal switch (TSS) mounting hardware will work great!
Note: the 2009-2010 Polaris Ranger 500, the 2009-2012 Ranger XP & HD, the 2010-2012 Ranger 800 Crew & 6x6, and the 2011-2012 Ranger Diesel Models use our custom turn signal switch (TSS) mounting strap. This custom strap will allow the tilt steering to have full range of motion with the turn signal switch mounted just under the steering wheel. Order from the drop down box (BELOW) b) TurnSignal Switch: 09-10 Ranger 500 (TSS) Strap ..or.. 09-12 Ranger XP & HD (TSS) Strap ..or.. 10-12 Ranger 800 Crew (TSS) Strap ..or.. 10-12 Ranger 800 6x6 (TSS) Strap ..or.. 11-12 Ranger Diesel (TSS) Strap ..or.. 2012 Ranger Diesel Crew (TSS) Strap.
Note: the 2010-2012 Polaris Ranger EV & 400 and the 2011-12 Ranger 500 & 500 Crew use our custom turn signal switch (TSS) mounting plate. This custom plate was designed to mount the turn signal switch below the steering wheel on the plastic shroud. Order from the drop down box (BELOW) b) TurnSignal Switch: 10-12 Ranger EV & 400 (TSS) Plate ..or.. 11-12 Ranger 500 (TSS) Plate ..or.. 11-12 Ranger 500 Crew (TSS) Plate.
Note: the 2011-2012 Can-Am Commander use our custom turn signal switch (TSS) mounting bracket. This custom bracket was designed to mount the turn signal switch below the instrument cluster on the steering column. Order from the drop down box (BELOW) b) TurnSignal Switch: 11-12 CanAm Commander (TSS) Bracket.
Note: the 2009-2012 Honda Big Red MUV use our custom turn signal switch (TSS) mounting bracket. This custom bracket was designed to mount the turn signal switch below the steering wheel on the dash. Order from the drop down box (BELOW) b) TurnSignal Switch: 09-12 Honda BR MUV (TSS) Bracket.
Note: the 2008-2012 Arctic Cat Prowler with tilt steering, you may want to use a 5" inch hose clamp to mount the turn signal switch.
Note: the 2009-2012 Kawasaki Teryx with the plastic shroud molded up to the steering wheel, you will need to cut some of the plastic to make room for mounting the turn signal switch OR use a 5" inch hose clamp around the plastic shroud.
|
|
|
|
|
|
|
|
|
ALL KITS: In Stock & Ready to Ship!
|
|
|
|
This is a 12 volt Surface Mount LED Turn Signal Kit with 2 Surface Mounted ¾” inch Amber (front) and 2 Surface Mounted ¾” inch Red (rear) Super Bright DOT approved LED lights (no brackets required). The SM LED light kit comes with a turn signal switch, which has a pilot light for the turn signals and 4-way emergency flashers (hazard warning). The turn signal switch has a pull on flare tab for the 4-way hazard lights and the hardware to mount it to your steering column.
The 4 Surface Mounted LED super bright lights are ¾” inch round with an attached rubber grommet for quick mounting. They are surface mounted LED’s with a slim-line design for mounting in small spaces (no brackets required). These SM LED’s are DOT approved, meet the P2PC requirements for 45 degree mounting and provide superior light output. They have a Space Saving Design, Hi Impact Acrylic Lens and Housing and are hard wired with Completely Resin Sealed Electronics to eliminate corrosion.
The Special LED Electronic Flasher has the 3 pin connections for LOAD, PILOT and POWER.
The kit includes: 2 Amber and 2 Red SM LED super bright lights with grommets, the Turn Signal Switch and the hardware to mount it to your steering column, the special LED Electronic Flasher with mounting hardware, an ATC in-line fuse holder, a 3 amp fuse, the mounting installation instructions, the wiring instructions & diagram, and all the help and support you need from EZ Turn Signal Kits.
This aftermarket turn signal kit can be easily installed, you don’t need any brackets for mounting lights, it does not go into any factory wiring, and it is a completely independent system that comes with the wiring diagram and instructions. Each wire has a different color and the wiring diagram shows where each colored wire goes. I include my phone number and e-mail address with the instructions, so if you have any questions about your installation you can contact me.
This kit was originally developed for the Polaris RZR, RZRS, RZR4, Ranger 400, 500 and EV. My customers have installed their kits on the Polaris Ranger 400, 500, 700, 800, EV, XP, HD, Diesel, 6x6, RZR, RZR-S, RZR-4, RZR XP 900, RZR XP-4 900 & Crew, the Yamaha Rhino, the Can-Am Commander, the Honda Big Red MUV, the Kawasaki Mule & Teryx, and the Arctic Cat Prowler. This aftermarket turn signal kit can be easily installed on any 12 volt Side-by-Side UTV, Golf Cart, Sand Car, Dune Buggy, etc.
This turn signal switch has been installed on thousands of units, very nice and easy to operate. The Motor Vehicle Department and your local police departments will be impressed. Everyone who rides on the street, off road, at the dunes or in congested riding areas, should have turn signals for there added safety.
|
|
|
Total Power Draw: .20 amps - that's less than a quarter of an amp with the four hazard lights on!
|
|
|
<<< hold mouse over pictures to see other examples >>>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 – Amber SM LED Lights
2 – Red SM LED Lights
1 - Turn Signal Switch
|
|
1 - LED Flasher
1 - ATC Fuse Holder
1 - ATC 3 Amp Fuse
|
|
Hardware for mounting components
Mounting Installation Instructions
Wiring Instructions & Diagram
|
|
|
Options: We have a Wire & Connector Kit that you may want to use with our Turn Signal Kit.
- If you don’t have Wire and Connectors, this kit will make it easy to connect your turn signals.
|
|
|
|
 
|
|
|
|
The LED Turn Signal Kit will fit all years for the Polaris Ranger XP / HD / EV / Diesel / 6x6 / TM / 400 / 425 / 500 / 700 / 800 / RZR / RZRS / RZR4 / RZR XP 900 / RZR XP-4 900 and Crew models, all years for the Yamaha Rhino 700 / 660 & 450 models, all years for the Can-Am Commander 800 & 1000 models, all years for the Honda Big Red MUV, all years for the Kawasaki Teryx & Mule models, and all years for the Arctic Cat Prowler models. (SEE NOTES BELOW) This kit can be easily installed on any Side-by-Side (side x side), UTV, Golf Cart, Sand Car, Dune Buggy, etc.
Note: some like amber lights front and rear, order from the drop down box (BELOW) a) Light Options: Amber Kit: All 4 Amber lights.
|
|
Note: All Makes & Models Listed Below will use the Standard Turn Signal Switch (TSS) Mounting Hardware list includes: 1999-2008 Polaris Ranger's all models, 2008-2012 RZR's all models, 2008-2009 Ranger 700 Crew's, 2004-2012 Yamaha Rhino's all models, 2000-2012 Kawasaki Mule's all models, 2008 Kawasaki Teryx, 2005-2007 Arctic Cat Prowler 550 & 650, 2009-2012 Prowler 1000, Golf Cart, Sand Car, Dune Buggy, etc. If you have 3" inches or more of steering column space, the standard turn signal switch (TSS) mounting hardware will work great!
Note: the 2009-2010 Polaris Ranger 500, the 2009-2012 Ranger XP & HD, the 2010-2012 Ranger 800 Crew & 6x6, and the 2011-2012 Ranger Diesel Models use our custom turn signal switch (TSS) mounting strap. This custom strap will allow the tilt steering to have full range of motion with the turn signal switch mounted just under the steering wheel. Order from the drop down box (BELOW) b) TurnSignal Switch: 09-10 Ranger 500 (TSS) Strap ..or.. 09-12 Ranger XP & HD (TSS) Strap ..or.. 10-12 Ranger 800 Crew (TSS) Strap ..or.. 10-12 Ranger 800 6x6 (TSS) Strap ..or.. 11-12 Ranger Diesel (TSS) Strap ..or.. 2012 Ranger Diesel Crew (TSS) Strap.
Note: the 2010-2012 Polaris Ranger EV & 400 and the 2011-12 Ranger 500 & 500 Crew use our custom turn signal switch (TSS) mounting plate. This custom plate was designed to mount the turn signal switch below the steering wheel on the plastic shroud. Order from the drop down box (BELOW) b) TurnSignal Switch: 10-12 Ranger EV & 400 (TSS) Plate ..or.. 11-12 Ranger 500 (TSS) Plate ..or.. 11-12 Ranger 500 Crew (TSS) Plate.
Note: the 2011-2012 Can-Am Commander use our custom turn signal switch (TSS) mounting bracket. This custom bracket was designed to mount the turn signal switch below the instrument cluster on the steering column. Order from the drop down box (BELOW) b) TurnSignal Switch: 11-12 CanAm Commander (TSS) Bracket.
Note: the 2009-2012 Honda Big Red MUV use our custom turn signal switch (TSS) mounting bracket. This custom bracket was designed to mount the turn signal switch below the steering wheel on the dash. Order from the drop down box (BELOW) b) TurnSignal Switch: 09-12 Honda BR MUV (TSS) Bracket.
Note: the 2008-2012 Arctic Cat Prowler with tilt steering, you may want to use a 5" inch hose clamp to mount the turn signal switch.
Note: the 2009-2012 Kawasaki Teryx with the plastic shroud molded up to the steering wheel, you will need to cut some of the plastic to make room for mounting the turn signal switch OR use a 5" inch hose clamp around the plastic shroud.
|
|
|
|
|
|
|
|
|
ALL KITS: In Stock & Ready to Ship!
|
|
|
|
This is a 12 volt LED Turn Signal Kit with 2 Amber (front) and 2 Red (rear) DOT approved LED lights. The 4 LED light kit comes with a turn signal switch, which has a pilot light for the turn signals and 4-way emergency flashers (hazard warning). The turn signal switch has a pull on flare tab for the 4-way hazard lights and the hardware to mount it to your steering column.
The four LED Lights are 4”x 2” rectangular with 16 (LED) Light Emitting Diodes each, polycarbonate lens & housing and hard wired with encapsulated electronics to eliminate corrosion.
The special LED Electronic Flasher has the 3 pin connections for LOAD, PILOT and POWER.
The kit includes: 2 Amber and 2 Red DOT approved LED lights, the Turn Signal Switch and the hardware to mount it to your steering column, the special LED Electronic Flasher, an in-line fuse holder, a 3 amp fuse, the self tapping screws for mounting the lights and flasher, the mounting installation instructions, the wiring instructions & diagram, and all the help and support you need from EZ Turn Signal Kits.
This aftermarket turn signal kit can be easily installed, it does not go into any factory wiring, and it is a completely independent system that comes with the wiring diagram and instructions. Each wire has a different color and the wiring diagram shows where each colored wire goes. I include my phone number and e-mail address with the instructions, so if you have any questions about your installation you can contact me.
This kit was originally developed for my 2006 Polaris Ranger XP and my customers have installed their kits on the Polaris Ranger 425 / TM / 400 / 500 / 700 / 800 / XP / HD / Diesel / 6x6, Razor (RZR, RZRS, RZR4, RZR XP 900, RZR XP-4 900) and Crew, the Yamaha Rhino, the Can-Am Commander, the Honda Big Red MUV, the Kawasaki Mule and Teryx, and the Arctic Cat Prowler. This aftermarket turn signal kit can be easily installed on any 12 volt Side-by-Side, UTV, Golf Cart, Sand Car, Dune Buggy, etc.
This turn signal switch has been installed on thousands of units, very nice and easy to operate. The Motor Vehicle Department and your local police departments will be impressed. Everyone who rides on the street, off road, at the dunes or in congested riding areas, should have turn signals for there added safety.
|
|
|
Total Power Draw: .32 amps - that's less than a third of an amp with the four hazard lights on!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 - Amber 4" x 2" LED Lights
2 - Red 4" x 2" LED Lights
1 - Turn Signal Switch
|
|
1 - LED Flasher
1 - ATC Fuse Holder
1 - ATC 3 Amp Fuse
|
|
Hardware for mounting components
Mounting Installation Instructions
Wiring Instructions & Diagram
|
|
|
Options: We have some Custom Kit Brackets along with a Wire & Connector Kit that you may want to use with your Turn Signal Kit. Any of these options purchased with your kit, will save you money!
|
|
|
|
|
|
|
|
|
|
LED Parking Lights
& Turn Signal Kit
|
|
|
|
The LED Parking Lights & Turn Signal Kit will fit all years for the Polaris Ranger XP / HD / EV / Diesel / 6x6 / TM / 400 / 425 / 500 / 700 / 800 / RZR / RZRS / RZR4 / RZR XP 900 / RZR XP-4 900 and Crew models, all years for the Yamaha Rhino 700 / 660 & 450 models, all years for the Can-Am Commander 800 & 1000 models, all years for the Honda Big Red MUV, all years for the Kawasaki Teryx & Mule models, and all years for the Arctic Cat Prowler models. (SEE NOTES BELOW) This kit can be easily installed on any Side-by-Side (side x side), UTV, Golf Cart, Sand Car, Dune Buggy, etc.
Note: some like amber lights front and rear, order from the drop down box (BELOW) a) Light Options: Amber Kit: All 4 Amber lights.
|
|
Note: All Makes & Models Listed Below will use the Standard Turn Signal Switch (TSS) Mounting Hardware list includes: 1999-2008 Polaris Ranger's all models, 2008-2012 RZR's all models, 2008-2009 Ranger 700 Crew's, 2004-2012 Yamaha Rhino's all models, 2000-2012 Kawasaki Mule's all models, 2008 Kawasaki Teryx, 2005-2007 Arctic Cat Prowler 550 & 650, 2009-2012 Prowler 1000, Golf Cart, Sand Car, Dune Buggy, etc. If you have 3" inches or more of steering column space, the standard turn signal switch (TSS) mounting hardware will work great!
Note: the 2009-2010 Polaris Ranger 500, the 2009-2012 Ranger XP & HD, the 2010-2012 Ranger 800 Crew & 6x6, and the 2011-2012 Ranger Diesel Models use our custom turn signal switch (TSS) mounting strap. This custom strap will allow the tilt steering to have full range of motion with the turn signal switch mounted just under the steering wheel. Order from the drop down box (BELOW) b) TurnSignal Switch: 09-10 Ranger 500 (TSS) Strap ..or.. 09-12 Ranger XP & HD (TSS) Strap ..or.. 10-12 Ranger 800 Crew (TSS) Strap ..or.. 10-12 Ranger 800 6x6 (TSS) Strap ..or.. 11-12 Ranger Diesel (TSS) Strap ..or.. 2012 Ranger Diesel Crew (TSS) Strap.
Note: the 2010-2012 Polaris Ranger EV & 400 and the 2011-12 Ranger 500 & 500 Crew use our custom turn signal switch (TSS) mounting plate. This custom plate was designed to mount the turn signal switch below the steering wheel on the plastic shroud. Order from the drop down box (BELOW) b) TurnSignal Switch: 10-12 Ranger EV & 400 (TSS) Plate ..or.. 11-12 Ranger 500 (TSS) Plate ..or.. 11-12 Ranger 500 Crew (TSS) Plate.
Note: the 2011-2012 Can-Am Commander use our custom turn signal switch (TSS) mounting bracket. This custom bracket was designed to mount the turn signal switch below the instrument cluster on the steering column. Order from the drop down box (BELOW) b) TurnSignal Switch: 11-12 CanAm Commander (TSS) Bracket.
Note: the 2009-2012 Honda Big Red MUV use our custom turn signal switch (TSS) mounting bracket. This custom bracket was designed to mount the turn signal switch below the steering wheel on the dash. Order from the drop down box (BELOW) b) TurnSignal Switch: 09-12 Honda BR MUV (TSS) Bracket.
Note: the 2008-2012 Arctic Cat Prowler with tilt steering, you may want to use a 5" inch hose clamp to mount the turn signal switch.
Note: the 2009-2012 Kawasaki Teryx with the plastic shroud molded up to the steering wheel, you will need to cut some of the plastic to make room for mounting the turn signal switch OR use a 5" inch hose clamp around the plastic shroud.
|
|
|
|
|
|
|
|
|
ALL KITS: In Stock & Ready to Ship!
|
|
|
|
This is a 12 volt LED Parking Lights and Turn Signal Kit with 2 Amber (front) and 2 Red (rear) Dual Mode DOT approved LED lights. The 4 Dual Mode LED light kit comes with a turn signal switch, which has a pilot light for the turn signals and 4-way emergency flashers (hazard warning). The turn signal switch has a pull on flare tab for the 4-way hazard lights and the hardware to mount it to your steering column.
The four Dual Mode LED Lights are 4”x 2” rectangular with 12 Colored (red or amber) Light Emitting Diodes each. They are chrome based, come with both clear & colored lenses and are hard wired with encapsulated electronics to eliminate corrosion. They have 3 wires each, one for ground, normal mode (parking lights) and high mode (turn signals), which is equal to 24 LED’s on high mode.
The special LED Electronic Flasher has the 3 pin connections for LOAD, PILOT and POWER.
The Parking Light Switch is a LED illuminated rocker switch and is easy to install, vibration resistance, and will illuminate when turned on.
The kit includes: 2 Amber and 2 Red Dual Mode DOT approved LED lights with both colored and clear lenses, the Turn Signal Switch and the hardware to mount it to your steering column, the special LED Electronic Flasher, the LED illuminated rocker switch for parking lights, an in-line fuse holder, a 3 amp fuse, the self tapping screws for mounting the lights and flasher, the mounting installation instructions, the wiring instructions & diagram, and all the help and support you need from EZ Turn Signal Kits.
This aftermarket turn signal kit can be easily installed, it does not go into any factory wiring, and it is a completely independent system that comes with the wiring diagram and instructions. Each wire has a different color and the wiring diagram shows where each colored wire goes. I include my phone number and e-mail address with the instructions, so if you have any questions about your installation you can contact me.
This kit was originally developed for my 2009 Polaris Ranger XP and my customers have installed their kits on the Polaris Ranger 425 / TM / 400 / 500 / 700 / 800 / XP / HD / Diesel / 6x6, Razor (RZR RZRS RZR4 RZR XP 900, RZR XP-4 900) and Crew, the Yamaha Rhino, the Can-Am Commander, the Honda Big Red MUV, the Kawasaki Mule and Teryx, and the Arctic Cat Prowler. This aftermarket turn signal kit can be easily installed on any 12 volt Side-by-Side, UTV, Golf Cart, Sand Car, Dune Buggy, etc.
This turn signal switch has been installed on thousands of units, very nice and easy to operate. The Motor Vehicle Department and your local police departments will be impressed. Everyone who rides on the street, off road, at the dunes or in congested riding areas, should have turn signals for there added safety.
|
|
|
Total Power Draw: .84 amps - that's less than an amp with the four parking and hazard lights on!
|
|
|
<<< hold mouse over pictures to see other examples >>>
|
|
|
|
|
|
|
|
|
|
|
2 - Amber 4"x2" DM LED Lights
2 - Red 4"x2" DM LED Lights
1 - Turn Signal Switch
|
|
1 - LED Flasher
1 - Fuse Holder & Fuse
1 - LED Rocker Switch
|
|
Hardware for mounting components
Mounting Installation Instructions
Wiring Instructions & Diagram
|
|
|
Options: We have some Custom Kit Brackets along with a Wire & Connector Kit that you may want to use with your Turn Signal Kit. Any of these options purchased with your kit, will save you money!
|
|
|
|
|
|
|
|
|
|
|
|
Regular Bulb Turn Signal Kit
|
|
|
|
The Regular Bulb Turn Signal Kit will fit all years for the Polaris Ranger XP / HD / Diesel / 6x6 / TM / 400 / 425 / 500 / 700 / 800 / RZR / RZRS / RZR4 / RZR XP 900 / RZR XP-4 900 and Crew models, all years for the Yamaha Rhino 700 / 660 & 450 models, all years for the Can-Am Commander 800 & 1000 models, all years for the Honda Big Red MUV, all years for the Kawasaki Teryx & Mule models, and all years for the Arctic Cat Prowler models. (SEE NOTES BELOW) This kit can be easily installed on any Side-by-Side (side x side), UTV, Golf Cart, Sand Car, Dune Buggy, etc.
Note: some like amber lights front and rear, order from the drop down box (BELOW) a) Light Options: Amber Kit: All 4 Amber lights.
|
|
Note: All Makes & Models Listed Below will use the Standard Turn Signal Switch (TSS) Mounting Hardware list includes: 1999-2008 Polaris Ranger's all models, 2008-2012 RZR's all models, 2008-2009 Ranger 700 Crew's, 2004-2012 Yamaha Rhino's all models, 2000-2012 Kawasaki Mule's all models, 2008 Kawasaki Teryx, 2005-2007 Arctic Cat Prowler 550 & 650, 2009-2012 Prowler 1000, Golf Cart, Sand Car, Dune Buggy, etc. If you have 3" inches or more of steering column space, the standard turn signal switch (TSS) mounting hardware will work great!
Note: the 2009-2010 Polaris Ranger 500, the 2009-2012 Ranger XP & HD, the 2010-2012 Ranger 800 Crew & 6x6, and the 2011-2012 Ranger Diesel Models use our custom turn signal switch (TSS) mounting strap. This custom strap will allow the tilt steering to have full range of motion with the turn signal switch mounted just under the steering wheel. Order from the drop down box (BELOW) b) TurnSignal Switch: 09-10 Ranger 500 (TSS) Strap ..or.. 09-12 Ranger XP & HD (TSS) Strap ..or.. 10-12 Ranger 800 Crew (TSS) Strap ..or.. 10-12 Ranger 800 6x6 (TSS) Strap ..or.. 11-12 Ranger Diesel (TSS) Strap ..or.. 2012 Ranger Diesel Crew (TSS) Strap.
Note: the 2010-2012 Polaris Ranger EV & 400 and the 2011-12 Ranger 500 & 500 Crew use our custom turn signal switch (TSS) mounting plate. This custom plate was designed to mount the turn signal switch below the steering wheel on the plastic shroud. Order from the drop down box (BELOW) b) TurnSignal Switch: 10-12 Ranger EV & 400 (TSS) Plate ..or.. 11-12 Ranger 500 (TSS) Plate ..or.. 11-12 Ranger 500 Crew (TSS) Plate.
Note: the 2011-2012 Can-Am Commander use our custom turn signal switch (TSS) mounting bracket. This custom bracket was designed to mount the turn signal switch below the instrument cluster on the steering column. Order from the drop down box (BELOW) b) TurnSignal Switch: 11-12 CanAm Commander (TSS) Bracket.
Note: the 2009-2012 Honda Big Red MUV use our custom turn signal switch (TSS) mounting bracket. This custom bracket was designed to mount the turn signal switch below the steering wheel on the dash. Order from the drop down box (BELOW) b) TurnSignal Switch: 09-12 Honda BR MUV (TSS) Bracket.
Note: the 2008-2012 Arctic Cat Prowler with tilt steering, you may want to use a 5" inch hose clamp to mount the turn signal switch.
Note: the 2009-2012 Kawasaki Teryx with the plastic shroud molded up to the steering wheel, you will need to cut some of the plastic to make room for mounting the turn signal switch OR use a 5" inch hose clamp around the plastic shroud.
|
|
|
|
|
|
|
|
|
ALL KITS: In Stock & Ready to Ship!
|
|
|
|
This is a 12 volt Regular Bulb Turn Signal Kit with 2 Amber (front) and 2 Red (rear) DOT approved Regular Bulb lights. The 4 Regular Bulb light kit comes with a turn signal switch, which has a pilot light for the turn signals and 4-way emergency flashers (hazard warning). The turn signal switch has a pull on flare tab for the 4-way hazard lights and the hardware to mount it to your steering column.
The four Regular Bulb Lights are 4”x 2” rectangular with (2) bulbs each, they have two stainless steel grounds, corrosion-resistant contacts, lubricated fleet service bulbs, corrosion-proof body; they come with 4 extra ground wires and 8 self tapping screws for mounting.
The Bulb Flasher has the 3 pin connections for LOAD, PILOT and POWER. This flasher comes with a clamp and a self tapping screw for mounting.
The kit includes: 2 Amber and 2 Red DOT approved Regular Bulb lights, 4 ground wires with ring tong connectors (for grounding the regular lights), the Turn Signal Switch and the hardware to mount it to your steering column, the Flasher with mounting clamp, an in-line fuse holder, a 5 amp fuse, the self tapping screws for mounting the lights and flasher, the mounting installation instructions, the wiring instructions & diagram, and all the help and support you need from EZ Turn Signal Kits.
This aftermarket turn signal kit can be easily installed, it does not go into any factory wiring, and it is a completely independent system that comes with the wiring diagram and instructions. Each wire has a different color and the wiring diagram shows where each colored wire goes. I include my phone number and e-mail address with the instructions, so if you have any questions about your installation you can contact me.
My customers have installed their kits on the Polaris Ranger 425 / TM / 500 / 700 / 800 / XP / HD / Diesel / 6x6, Razor RZR / RZRS / RZR4 / RZR 900 XP and Crew, the Yamaha Rhino, the Can-Am Commander, the Honda Big Red MUV, the Kawasaki Mule and Teryx, and the Arctic Cat Prowler. This aftermarket turn signal kit can be easily installed on any 12 volt Side-by-Side, UTV, Golf Cart, Sand Car, Dune Buggy, etc.
This turn signal switch has been installed on thousands of units, very nice and easy to operate. The Motor Vehicle Department and your local police departments will be impressed. Everyone who rides on the street, off road, at the dunes or in congested riding areas, should have turn signals for there added safety.
|
|
|
Total Power Draw: 2.65 amps with the four hazard lights on!
|
|
|
|
|
|
|
|
2 - Amber 4"x2" REG Bulb Lights
2 - Red 4"x2" REG Bulb Lights
1 - Turn Signal Switch
|
|
1 - Regular Flasher
1 - ATC Fuse Holder
1 - ATC 5 Amp Fuse
|
|
Hardware for mounting components
Mounting Installation Instructions
Wiring Instructions & Diagram
|
|
|
Options: We have some Custom Kit Brackets along with a Wire & Connector Kit that you may want to use with your Turn Signal Kit. Any of these options purchased with your kit, will save you money!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For more information:
EZ Turn Signal Kits
P. O. Box 1818
Glendale, AZ 85311-1818 US
E-mail: Cisco@LEDTSK.com
Glendale Office #1: (623) 435-1337
Glendale Office #2: (623) 939-0834
|
|
|
|
|
|
|
|
